FANDOM


Line 1: Line 1:
 
On this page, you will find the mount reference for each 3D elements.
 
On this page, you will find the mount reference for each 3D elements.
  +
  +
[[File:990.png|right]]
   
 
The position are all from the .geom file !!
 
The position are all from the .geom file !!
  +
  +
The 3D model should have the following parts:
  +
 *Front wheel > fwheel.edf
  +
*Rear wheel > rwheel.edf
  +
*Upper fork (with grip, Tee) > steer.edf
  +
*Lower fork (with caliper, front axis) > fsusp.edf
  +
*Swingarm > rsusp.edf
  +
*Chassis chassis.edf
  +
  +
  +
  +
  +
  +
  +
 
==Front/rear wheel==
 
==Front/rear wheel==
 
The front and rear wheel should have the 0 axis in the center of the wheel axis.
 
The front and rear wheel should have the 0 axis in the center of the wheel axis.
Line 11: Line 28:
 
The wheel is then placed on the <u>rwheel_min</u> position
 
The wheel is then placed on the <u>rwheel_min</u> position
 
==Lower fork (with caliper)==
 
==Lower fork (with caliper)==
The position of the front wheel axis is fwheel. 
+
The position of the front wheel axis is <u>fwheel</u>
   
X is pointed toward right of the motorcycle when on it
+
''X is pointed toward right of the motorcycle when on it''
   
Y is pointed toward up
+
''Y is pointed toward up''
   
Z is pointed toward rear of the bike
+
''Z is pointed toward rear of the bike''
 
==Higher fork==
 
==Higher fork==
 
I don't have enough info to place it correctly
 
I don't have enough info to place it correctly
   
It looks like the center of the Tee, is at the position front_upper
+
It looks like the center of the Tee, is at the position <u>front_upper</u>
  +
==Chassis==
  +
The chassis should be positioned with the footpeg on <u>footpeg_left</u> (or right)
  +
  +
The point 
  +
  +
''X is pointed toward right of the motorcycle when on it''
  +
  +
''Y is pointed toward up''
  +
  +
''Z is pointed toward rear of the bike''

Revision as of 15:11, January 14, 2014

On this page, you will find the mount reference for each 3D elements.

990

The position are all from the .geom file !!

The 3D model should have the following parts:  *Front wheel > fwheel.edf

  • Rear wheel > rwheel.edf
  • Upper fork (with grip, Tee) > steer.edf
  • Lower fork (with caliper, front axis) > fsusp.edf
  • Swingarm > rsusp.edf
  • Chassis chassis.edf




Front/rear wheel

The front and rear wheel should have the 0 axis in the center of the wheel axis.

Swingarm

The swingarm is mounted on the point chassis_rsusp_min position from the chassis.

Its reference (0,0,0) should be the pivot point.

The wheel is then placed on the rwheel_min position

Lower fork (with caliper)

The position of the front wheel axis is fwheel

X is pointed toward right of the motorcycle when on it

Y is pointed toward up

Z is pointed toward rear of the bike

Higher fork

I don't have enough info to place it correctly

It looks like the center of the Tee, is at the position front_upper

Chassis

The chassis should be positioned with the footpeg on footpeg_left (or right)

The point 

X is pointed toward right of the motorcycle when on it

Y is pointed toward up

Z is pointed toward rear of the bike

Community content is available under CC-BY-SA unless otherwise noted.